View XQEGRN-H0-0000-000000C01_8656488.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds83 rev 7a cree ? xlamp ? xq-e leds xq-e high density leds xq-e high intensity leds pro duc t d escripti on the xlamp ? xq- e le ds are available in two versions: high density and high intensity. the xq- e high density le d enables lighting manufacturers to signifcantly reduce the size and total cost of their l e d luminaires versus similar performance 3.5 -mm footprint leds, without sacrifcing lumen output, effcacy or reliability. the xq- e s combination of optical symmetry, consistent design across all confgurations and tiny 1.6?mm x 1.6?mm footprint simplifes manufacturing and design while providing excellent color mixing. the new xq- e high intensity le d uses an innovative primary optic design optimized to deliver maximum candela, especially through narrow - beam secondary optics. fea tures ? crees smallest lighting class l ed: 1.6?mm x 1.6?mm ? available in high -density & high- intensity versions for design fexibility ? available in 70, 80, & 90 cri white, royal blue, blue, green, pc amber, red - orange, red, photo red & high effciency (he) photo red ? maximum drive current: 1?a (high density & high intensity) ? refow solderable - jedec j-std-020c compatible ? unlimited foor life at 30?c/85% rh ? rohs and re ach compliant ? ul ? recognized component (e349212) ta ble o f cont e nts characteristics ............................................ 2 flux characteristics - high density white . 3 flux characteristics - high density color .. 4 flux characteristics - high intensity white ............................................................ 6 flux characteristics - high intensity color ............................................................. 7 relative spectral power distribution ......... 9 relative flux vs. junction temperature .. 11 e lectrical characteristics ......................... 14 relative flux vs. current .......................... 16 typical spatial distribution ...................... 19 thermal design ........................................ 21 refow soldering characteristics ............ 24 notes ........................................................ 25 mechanical dimensions .......................... 27 tape and reel ........................................... 29 packaging ................................................. 31 product family data sheet copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www. cr ee. c om/x lamp
2 c har ac teristics characteristics unit minimum t ypical maximum thermal resistance, junction to solder point - white, royal blue, blue c/w 6 thermal resistance, junction to solder point - green c/w 9 thermal resistance, junction to solder point - pc amber c/w 8 thermal resistance, junction to solder point - red - orange, red, photo red, he photo red c/w 5 viewing angle (fwhm) - high density white degrees 110 viewing angle (fwhm) - high density royal blue, blue, green, pc amber degrees 125 viewing angle (fwhm) - high density red - orange, red, photo red, he photo red degrees 130 viewing angle (fwhm) - high intensity white degrees 120 viewing angle (fwhm) - high intensity royal blue, blue, green degrees 130 viewing angle (fwhm) - high intensity pc amber degrees 120 viewing angle (fwhm) - high intensity red - orange, red degrees 125 temperature coeffcient of voltage - white mv/c -2.3 temperature coeffcient of voltage - royal blue, blue mv/c -3.3 temperature coeffcient of voltage - green mv/c -3.8 temperature coeffcient of voltage - pc amber mv/c -3.3 temperature coeffcient of voltage - red - orange, red mv/c -1.8 temperature coeffcient of voltage - photo red mv/c -2.8 temperature coeffcient of voltage - he photo red mv/c -1.6 esd withstand voltage (hbm per mil-std-883d)- high density v 8000 esd classifcation (hbm per mil-std-883d) - high intensity class 3a dc forward current ma 1000 reverse voltage v 5 forward voltage (@ 350?ma, 85?c) - white v 2.9 3.25 forward voltage (@ 350 ma, 25?c) - royal blue, blue v 3.1 3.5 forward voltage (@ 350 ma, 25?c) - green v 3.2 3.6 forward voltage (@ 350 ma, 25?c) - pc amber v 3.1 3.5 forward voltage (@ 350 ma, 25?c) - red - orange, red, photo red v 2.2 2.6 forward voltage (@ 350 ma, 25?c) - he photo red v 2.1 2.4 le d junction temperature c 150 copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
3 fl ux c har ac teristic s - high densi ty w hi te ( t j ?=?85?c) the following table provides several base order codes for xlamp xq- e high density white le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete hiwgvmtxmsrsxlisvhivgshirsqirgpexvitpiewigsrwpxxli0eqt5*eqmp]0w&mrrmrkerh0efipmrkhsgqirx color cc t range minimum luminous flux (lm) @ 350?ma calculated minimum luminous flux (lm)** @ 85?c o rder code minimum maximum g roup flux (lm) @ 85?c flux (lm) @ 25?c* 700?ma 1.0?a cool white 5000 k 8300 k r3 580* 580 70-cri white 3700 k 8300 k r3 58&* 58& neutral white 3700 k 5300 k 580 q5 580 5 580 warm white 3500 k q5 xq e awt-00-0000-00000lde7 5 xq e awt-00-0000-00000lce7 q3 93.9 580& 5 xq e awt-00-0000-00000lae7 80-cri white 3500 k q5 xq e awt-00-0000-00000hde7 5 xq e awt-00-0000-00000hce7 q3 93.9 58,& 5 xq e awt-00-0000-00000hae7 90-cri white e 3000 k 93.3 xq e awt-00-0000-00000u9e7 p3 73.9 85.5 xq e awt-00-0000-00000u8e7 77.8 xq e awt-00-0000-00000u7e7 589 notes: u viiqemrxemrwexspivergisrsrerhts[ivqiewviqirxwrsrglvsqexmgmx]]qiewviqirxwerhrsr -qiewviqirxw7iixliiewviqirxwwigxmsrteki u 8]tmgep-svssplmxieie8mw u 8]tmgep-svixveplmxieie8mw u 8]tmgep-svevqlmxieie8mw u minimum cri for 70-cri white is 70. u minimum cri for 80-cri white is 80. u minimum cri for 90-cri white is 90. * *pepiweevigepgpexiherhsvviivirgisrp] epgpexihepiwexeqerheevisvviivirgisrp] copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
4 fl ux c har ac teristic s - high densi ty co l or ( t j ddd the following tables provide several base order codes for xlamp xq- e high density color le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xq family leds binning and labeling document. color dominant wavelength range minimum radiant flux qq o rder code minimum maximum g roup dwl rq g roup dwl rq g roup pyq royal blue d36 450 d57 465 36 (q) 600 xqeroy-00-0000-000000q01 35 (p) 575 xqeroy-00-0000-000000p01 34 (n) 550 xqeroy-00-0000-000000n01 33 (m) 525 xqeroy-00-0000-000000m01 32 (l) 500 xqeroy-00-0000-000000l01 31 (k) 475 xqeroy-00-0000-000000k01 30 (j) 450 xqeroy-00-0000-000000j01 color dominant wavelength range minimum luminous pypqq o rder code minimum maximum g roup dwl rq g roup dwl rq g roup pypq blue b3 465 b6 485 m3 45.7 xqeblu-00-0000-000000301 m2 39.8 xqeblu-00-0000-000000201 k3 35.2 xqeblu-00-0000-000000z01 k2 30.6 xqeblu-00-0000-000000y01 color dominant wavelength range minimum luminous pypqq o rder code minimum maximum g roup dwl rq g roup dwl rq g roup pypq green g2 520 g4 535 q5 107 xqegrn-00-0000-000000d01 q4 100 xqegrn-00-0000-000000c01 q3 93.9 xqegrn-00-0000-000000b01 note ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 25). copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
5 color color bin minimum luminous flux (lm) @ 350?ma o rder code g roup flux (lm) @ 25?c* pc amber 5 p3 73.9 5 color dominant wavelength range minimum luminous flux (lm) @ 350?ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) red- orange o3 3 q3 93.9 53& 5 53 53 p3 73.9 53 53 color dominant wavelength range minimum luminous flux (lm) @ 350?ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) red r3 p3 73.9 5 5 5 n3 5 color peak wavelength range minimum radiant flux (mw) @ 350?ma o rder code min. max. g roup pwl (nm) g roup pwl (nm) g roup flux (mw) photo red p5 350 5, 300 5, color peak wavelength range minimum radiant flux (mw) @ 350?ma o rder code min. max. g roup pwl (nm) g roup pwl (nm) g roup flux (mw) he photo red p5 375 5 350 5 fl ux c har ac teristic s - high densi ty co l or ( t j ?=?25?c) - continued note u vii qemrxemrw e xspivergi s r sr erh ts[iv qiewviqirxw r sr glvsqexmgmx] ] qiewviqirxw erh e xspivergisrsr-qiewviqirxw7iixliiewviqirxwwigxmsrteki copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
6 fl ux c har ac teristic s - high int ensi ty w hi te ( t j ddd the following table provides several base order codes for xlamp xq- e high intensity white le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xq family leds binning and labeling document. color cc t range mrmqyqyqmrsywpypq dq calculated minimum yqmrsywpypq d o rder code minimum maximum g roup pypq d pypq d dq d cool white 5000 k 8300 k r3 122 136 213 276 xqeawt-h0-0000-00000lfe1 r2 114 127 199 258 xqeawt-h0-0000-00000lee1 70-cri white 3700 k 8300 k r3 122 136 213 276 xqeawt-h0-0000-00000bfe1 r2 114 127 199 258 xqeawt-h0-0000-00000bee1 neutral white 3700 k 5300 k r2 114 127 199 258 xqeawt-h0-0000-00000lee4 q5 107 119 187 242 xqeawt-h0-0000-00000lde4 q4 100 111 175 226 xqeawt-h0-0000-00000lce4 warm white 2700 k 3500 k q5 107 119 187 242 xq e awt-h0-0000-00000lde7 q4 100 111 175 226 xq e awt-h0-0000-00000lce7 q3 93.9 105 164 213 xqeawt-h0-0000-00000lbe7 80-cri white 2700 k 3500 k q5 107 119 187 242 xq e awt-h0-0000-00000hde7 q4 100 111 175 226 xq e awt-h0-0000-00000hce7 q3 93.9 105 164 213 xqeawt-h0-0000-00000hbe7 90-cri white 2850?k 3000 k p4 80.6 89.9 141 182 xq e awt-h0-0000-00000u9e7 p3 73.9 82.4 129 167 xq e awt-h0-0000-00000u8e7 p2 67.2 74.9 117 152 xq e awt-h0-0000-00000u7e7 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 25). ? typical cri for cool white (5000?k C 8300?k cct) is 70. ? typical cri for neutral white (3700?k C 5300?k cct) is 75. ? typical cri for warm white (2700?k C 3500?k cct) is 80. ? minimum cri for 70-cri white is 70. ? minimum cri for 80-cri white is 80. ? minimum cri for 90-cri white is 90. * flux values @ 25?c are calculated and for reference only. ** calculated fux values at 700?ma and 1?a are for reference only. copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
7 fl ux c har ac teristic s - high int ensi ty co l or ( t j ?=?25?c) the following tables provide several base order codes for xlamp xq- e high intensity color le ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete hiwgvmtxmsrsxlisvhivgshirsqirgpexvitpiewigsrwpxxli0eqt5*eqmp]0w&mrrmrkerh0efipmrkhsgqirx color dominant wavelength range minimum radiant flux (mw) @ 350 ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (mw) royal &pi d57 575 53, 550 53, 53, color dominant wavelength range minimum luminous flux (lm) @ 350 ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) lue 3 5 85 m2 39.8 5&09, k3 5&09, 5&09, color dominant wavelength range minimum luminous flux (lm) @ 350 ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) green 535 q5 5, 5 5, q3 93.9 5,& 5 5, 5, color color bin minimum luminous flux (lm) @ 350?ma o rder code g roup flux (lm) @ 25?c* pc amber p3 73.9 5, 5, note u vii qemrxemrw e xspivergi s r sr erh ts[iv qiewviqirxw r sr glvsqexmgmx] ] qiewviqirxw erh e xspivergisrsr-qiewviqirxw7iixliiewviqirxwwigxmsrteki copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
8 color dominant wavelength range minimum luminous flux (lm) @ 350?ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) red- orange o3 3 p3 73.9 53, 53, 53, color dominant wavelength range minimum luminous flux (lm) @ 350?ma o rder code minimum maximum g roup dwl (nm) g roup dwl (nm) g roup flux (lm) red r3 m3 5, 39.8 5, fl ux c har ac teristic s - high int ensi ty co l or ( t j ?=?25?c) - continued note u vii qemrxemrw e xspivergi s r sr erh ts[iv qiewviqirxw r sr glvsqexmgmx] ] qiewviqirxw erh e xspivergisrsr-qiewviqirxw7iixliiewviqirxwwigxmsrteki copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
9 rela tive spec tral po we r distributi on high density high density color relative spectral power high density cool & neutral white from copy of 161017 xqe nw_cw spectra data.xlsx 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 5700 k, 70 cri 4000 k, 75 cri 3000 k, 80 cri relative spectral power high density 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) royal blue blue green pc amber red-orange red photo red, he photo red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
10 rela tive spec tral po we r distributi on - continued high intensity high intensity color relative spectral power high intensity cool & neutral white from copy of 161017 xqe nw_cw spectra data.xlsx 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 5700 k, 70 cri 4000 k, 75 cri 3000 k, 80 cri relative spectral power high intensity 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) royal blue blue green pc amber red-orange red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
11 rela tive fl ux vs. jun c ti on tempera ture (i f d m high density high density color relative flux output vs. junction temperature high density 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) white relative flux output vs. junction temperature high density 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative radiant flux junction temperature (oc) royal blue photo red he photo red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
12 rela tive fl ux vs. jun c ti on tempera ture (i f d m -( high density color high intensity relative flux output vs. junction temperature high density 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) blue green pc amber red-orange red relative flux output vs. junction temperature high intensity 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) white copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
13 rela tive fl ux vs. jun c ti on tempera ture (i f d m -( high intensity color high intensity color relative flux output vs. junction temperature high intensity 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative radiant flux junction temperature (oc) royal blue relative flux output vs. junction temperature high intensity 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) blue green pc amber red-orange red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
14 elec trical c ha r ac teristic s ( t j d high density high density color electrical characteristics (tj = 85oc) high density 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) white electrical characteristics (tj = 85oc) high density 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) royal blue, blue green pc amber red-orange, red, photo red he photo red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
15 elec trical c ha r ac teristic s ( t j d-( high intensity high intensity color electrical characteristics (tj = 85oc) high intensity 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) white electrical characteristics (tj = 85oc) high intensity 0 200 400 600 800 1000 1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70 forward current (ma) forward voltage (v) royal blue, blue green pc amber red-orange, red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
16 rela tive fl ux vs. curr e nt ( t j d high density high density color relative intensity vs. current (tj = 85oc) high density 0% 50% 100% 150% 200% 250% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux forward current (ma) white relative intensity vs. current (tj = 85oc) high density 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 800 900 1000 relative radiant flux forward current (ma) royal blue photo red he photo red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
17 rela tive fl ux vs. curr e nt ( t j d-( high density color high intensity relative intensity vs. current (tj = 85oc) high density 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux forward current (ma) blue green pc amber red-orange red relative intensity vs. current (tj = 85oc) high intensity 0% 50% 100% 150% 200% 250% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux forward current (ma) white copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
18 rela tive fl ux vs. curr e nt ( t j d-( high intensity color high intensity color relative intensity vs. current (tj = 85oc) high intensity 0% 50% 100% 150% 200% 250% 0 100 200 300 400 500 600 700 800 900 1000 relative radiant flux forward current (ma) royal blue relative intensity vs. current (tj = 85oc) high intensity 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux forward current (ma) blue green pc amber red-orange red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
19 t ypical spa t ial distribution high density high density color typical spatial radiation pattern-white high density 0% 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 relative luminous intensity angle (o) white typical spatial radiation pattern-royal blue, blue, green, amber, red-orange, red high density 0% 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 relative luminous intensity angle (o) royal blue, blue, green pc amber red-orange, red, photo red, he photo red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
20 t ypical spa t ial distributi on - continued high intensity high intensity color typical spatial radiation pattern-white high intensity 0% 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 relative luminous intensity angle (o) white typical spatial radiation pattern-royal blue, blue, green, amber, red-orange, red high intensity 0% 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 relative luminous intensity angle (o) royal blue, blue, green pc amber red-orange, red copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
21 ther mal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. high density white r oyal blue, blue g reen pc amber red-o range, red photo red thermal design - white high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w thermal design - royal blue, blue high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w thermal design - pc amber high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w rj-a = 30c/w thermal design - green high density 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w rj-a = 30c/w thermal design - photo red high density 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w thermal design - red-orange, red high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
22 ther mal desi gn - continued the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. high density he photo red thermal design - he photo red high density 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
23 ther mal desi gn - continued the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. high intensity white r oyal blue, blue g reen pc amber red-o range, red thermal design - white high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w thermal design - royal blue, blue high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w thermal design - pc amber high density & high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w rj-a = 30c/w thermal design - green high intensity 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w rj-a = 30c/w thermal design - photo red high density 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
24 refl o w so lderi ng c har ac teristics in testing, cree has found xlamp xq-e leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to tp) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65-150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 - 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 - 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. ipc/jedec j-std-020c t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
25 n otes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. pre -release qualifcation t esting please read the le d reliability overview for details of the qualifcation process cree applies to ensure long-term reliability for xlamp leds and details of crees pre-release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized ies lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating led lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp leds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp leds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xq-e leds may be stored as msl 1 per jedec j-std-033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . r each compliance reach substances of very high concern (svhcs) information is available for this product. since the european chemical agency (echa) has published notice of their intent to frequently revise the svhc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date reach svhc declaration. reach banned substance information (reach article 67) is also available upon request. copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
26 ul ? r ecognized component level 1 enclosure consideration. the led package or a portion thereof has not been investigated as a fre enclosure or a fre and electrical enclosure per ansi/ul 8750. v ision advisory warning: do not look at an exposed lamp in operation. e ye injury can result. for more information about l e ds and eye safety, please refer to the led e ye safety application note . n ote s - continued copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
27 m echanical dimensions thermal vias, if present, are not shown on these drawings. all dimensions in mm. measurement tolerances unless indicated otherwise: .13 mm high density xq e awt-0x-xxxx-xxxxxxxxx xq- e high density high intensity xq e awt-h x-xxxx-xxxxxxxxx xq- e high intensity . size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .30 1.50 3.300 3.30 1.60 1.60 1.60 1.50 .60 .60 .30 r.936 .38 .44 1 / 1 45.000 d 2610-00035 xqe_xqa outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 b updated overall component height dc 6/9/15 c added optical ref. dc 12/8/15 yc d changed height to blend xqe/xqa together dc 12/17/15 sl recommended pc board solder pad recommended trace layout all dimensions are .13mm unless otherwide noted optical reference solder pad reference optical reference notch is on cathode(-) side t op view side view b ottom view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .30 1.50 3.300 3.30 1.60 1.60 1.60 1.50 .60 .60 .30 r.936 .38 .44 1 / 1 45.000 d 2610-00035 xqe_xqa outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 b updated overall component height dc 6/9/15 c added optical ref. dc 12/8/15 yc d changed height to blend xqe/xqa together dc 12/17/15 sl recommended pc board solder pad recommended trace layout all dimensions are .13mm unless otherwide noted optical reference solder pad reference optical reference notch is on cathode(-) side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .30 1.50 3.300 3.30 1.60 1.60 1.60 1.50 .60 .60 .30 r.936 .38 .44 1 / 1 45.000 d 2610-00035 xqe_xqa outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 b updated overall component height dc 6/9/15 c added optical ref. dc 12/8/15 yc d changed height to blend xqe/xqa together dc 12/17/15 sl recommended pc board solder pad recommended trace layout all dimensions are .13mm unless otherwide noted optical reference solder pad reference optical reference notch is on cathode(-) side optical reference optical reference notch is on cathode (-) side t op view side view b ottom view anode (+) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.60 1.60 .80 .10 .60 1.50 .30 1.50 .30 1.60 .65 1.60 .300 1.500 3.300 3.300 1 / 1 45.000 b 2610-00062 xqe hi outline -- -- -- -- -- -- 5/19/15 d. cronin revisons rev description by date app'd b added anode note and text dc 8/6/15 recommended pc board solder pad recommended trace layout dimensions are .13 unless otherwise noted optical reference solder pad reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.60 1.60 .80 .10 .60 1.50 .30 1.50 .30 1.60 .65 1.60 .300 1.500 3.300 3.300 1 / 1 45.000 b 2610-00062 xqe hi outline -- -- -- -- -- -- 5/19/15 d. cronin revisons rev description by date app'd b added anode note and text dc 8/6/15 recommended pc board solder pad recommended trace layout dimensions are .13 unless otherwise noted optical reference solder pad reference optical reference optical reference optical reference copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
28 m echanical dimensi ons - continued high density & high intensity size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .30 1.50 3.300 3.30 1.60 1.60 1.60 1.50 .60 .60 .30 r.936 .38 .44 1 / 1 45.000 d 2610-00035 xqe_xqa outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 b updated overall component height dc 6/9/15 c added optical ref. dc 12/8/15 yc d changed height to blend xqe/xqa together dc 12/17/15 sl recommended pc board solder pad recommended trace layout all dimensions are .13mm unless otherwide noted optical reference solder pad reference optical reference notch is on cathode(-) side r ecommended trace layout recommended pcb solder pad size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 .30 1.60 .65 1.60 .30 1.50 3.300 3.30 1.60 1.60 1.60 1.50 .60 .60 .30 r.936 .38 .44 1 / 1 45.000 d 2610-00035 xqe_xqa outline -- -- 7/19/13 j. nevins -- -- 7/19/13 d. seibel revisons rev description by date app'd a initial release dds 7/19/13 b updated overall component height dc 6/9/15 c added optical ref. dc 12/8/15 yc d changed height to blend xqe/xqa together dc 12/17/15 sl recommended pc board solder pad recommended trace layout all dimensions are .13mm unless otherwide noted optical reference solder pad reference optical reference notch is on cathode(-) side solder pad reference copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
29 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. e xcept as noted, all dimensions in mm [in]. measurement tolerances unless indicated otherwise: .xx = .10 mm high density xq e awt-0x-xxxx-xxxxxxxxx xq- e high density high intensity xq e awt-h x-xxxx-xxxxxxxxx xq- e high intensity size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 a a .30 .10 3.50 .10 1.85 1.65 1.750 8.000 nominal 8.30 max 1.000 +.10 -.00 1.500 4.000 2.000 revisons rev description by date app'd 1 / 1 4.000 a 2402-00023 carrier tape, 1.7x1.7 xpq 5/31/12 d. cronin notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2mm reference vendor part number 021142 cathode side anode side 1.85 [.073] bo .30 [.012] t 3.0 8.00 [.315] nominal 8.30 [.327] max w 6.25 [.246] e2 ? 1.00 [.039] d1 3.50 [.138] f 1.75 [.069] e2 ? 1.50 +.10/-.00 [+.0039/-.0000] 4.00 [.157] po 2.00 [.079] p2 4.00 [.157] p 1.98 [.078] 1.85 [.073] ao 3.0 1.20 [.047] ko pocket size 1.85 mm [.073?] 1.85 mm [.073?] 1.20 mm [.047?] ao bo ko cathode side anode side 1.85 [.073] bo .30 [.012] t 3.0 8.00 [.315] nominal 8.30 [.327] max w 6.25 [.246] e2 ? 1.00 [.039] d1 3.50 [.138] f 1.75 [.069] e2 ? 1.50 +.10/-.00 [+.0039/-.0000] 4.00 [.157] po 2.00 [.079] p2 4.00 [.157] p 1.98 [.078] 1.85 [.073] ao 3.0 1.20 [.047] ko pocket size 1.85 mm [.073?] 1.85 mm [.073?] 1.20 mm [.047?] ao bo ko cathode side anode side 1.85 [.073] bo .30 [.012] t 3.0 8.00 [.315] nominal 8.30 [.327] max w 6.25 [.246] e2 ? 1.00 [.039] d1 3.50 [.138] f 1.75 [.069] e2 ? 1.50 +.10/-.00 [+.0039/-.0000] 4.00 [.157] po 2.00 [.079] p2 4.00 [.157] p 1.98 [.078] 1.85 [.073] ao 3.0 1.20 [.047] ko pocket size 1.85 mm [.073?] 1.85 mm [.073?] 1.20 mm [.047?] ao bo ko cathode side anode side copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
30 tape and reel - cont inued high density & high intensity loaded pockets (xq-e high density - 2,000 lamps xq-e high intensity - 3,000 lamps) leader 400 mm (min) of empty pockets with at least 100 mm sealed by tape (50 empty pockets min.) trailer 160 mm (min) of empty pockets sealed with tape (20 pockets min.) start end 13 mm 7" cover tape pocket tape user feed direction user feed direction copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led
31 p ac ka ging the diagrams below show the packaging and labels cree uses to ship xlamp xq- e le ds. xlamp xq-e le ds are shipped in tape loaded on a reel. e ach box contains only one reel in a moisture barrier bag. patent label (on bottom of box) label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2013-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xq-e led

▲Up To Search▲

Price & Availability of XQEGRN-H0-0000-000000C01

	To Download XQEGRN-H0-0000-000000C01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .